Geeetech A10T Printers Tricolor 3D Printer with The Newest GT2560 4.0 Control Board Breaking-resuming Function Support…

Make sure this fits by entering your model number.
【Tricolor printing 】3 extruder module and 3-in-1-out hotend which deliver 4 types of printings, namely, single color, dual color, graded color and mixed color, so one can greatly enriches your 3D printing experience.
【Smart and Convenient】A10T equipped with the TF card makes it very easy for off-line printing,all you must do is select a 3D model file from the TF card,set the relevant printing parameters. Beef up 3D Touch auto bed leveling which lets you start printing within 5 minutes after assembly.
【 Open source firmware】 A10T comes with the newest GT2560 4.0 open source regulate board ,providing limitless space so that you can modify the firmware and tinker with your printer.
【Save your Time and Filament】The Break-resuming function provides A30 Pro can continue to print from the same place where it has been stopped, regardless of unexpected power failure or the filament have run out, allow you to change the filament and print it the following day.Totally get you out of worries about printing large-size 3D models.
【High Adhesion & Remove Easily】3mm aluminum heating bed + heat-resistant polyester film pressure plate,which have high adhesion building platform allows you take down your printing works easier, shouldn’t have mask tape and glue stick to any extent further.You’ll be able to remove your printing models easily with no spatula or razor necessary after finished printing.